Our H2-Experience (Gas & Liquid)
- Shut-Off Valves
- Check Valves
- Flow Control Valves
- Pressure Relief Valves
- Safety Valves
- Couplings
LH2 Tank system
Valve Types
Shut-off-Valve (SOV)
The principle of design and dimensioning of the Shut – off Valve (SOV) is a pneumatic or motor driven valve allowing restricting the flow of hydrogen in both directions.
The SOV is designed as a lift piston valve.
Types
- Cryogenic
- Gaseous
Actuator
- Solenoid
- Motor-driven
- Pneumatical supported
Characteristic
- Minimal leckage
- Quick Closing @Power loss
Parameter
- Fluid pressure: LH2: 22 bar
- Fluid temperature: 20 K < 370 K
- Flow rate: 0,2 kg/s
- Operating voltage: 12DC or 24VDC
- Closing Time @ powerloss: <400ms
- External leakage: ROM 1E-06 mbar l/s
- Internal leakage: ROM 1E-04 mbar l/s
Flow Control Valve (FCV)
The flow control valve is a 3/2 valve type, with a electrical regulation of the gas flow.
Characteristic
- Electrical controllable
- PWM or Constant type
Parameter
- Fluid temperature: 20 K < T < 370 K
- Operating pressure: 10 bar
- Pressure drop: <0,1 bar
- External leackage: ROM 1E-06 mbar l/s
- Internal leackage: ROM 1E-04 mbar l/s
Check Valve (CV)
The check valve (CV) is defined as automatic passive valve, which opens with forward flow and closes against reverse flow.
Characteristic
- Minimal leckage
- Minimal opening difference pressure
Parameter
- Fluid temperature: 20 K < T < 370 K
- Operating pressure: 10 bar
- Pressure drop: <0,1 bar
- External leackage: ROM 1E-06 mbar l/s
- Internal leackage: ROM 1E-04 mbar l/s
Pressure Relief Valve (PRV)
Safety Valve (SV)
The pressure relief (in this case boil-off valve) acts as a pressure relief valve in a hydrogen system in case of a rising pressure due to change in LH2 temperatures.
The safety valve acts also as a pressure relief valve, but could handle much more Flow in Emergency situations.
Characteristic
- Minimal Leckage
- Constant opening pressure
Parameter
- Fluid temperature: 20 K < T < 370 K
- Flow rate: e.g. 0,02 - 4 kg/s
- Operating pressure: on customer demand
- Reseating pressure: at least 5%, 10% tight
- External leackage: ROM 1E-06 mbar l/s
- Internal leackage: ROM 1E-04 mbar l/s
Digital Twin
Objective
- Development of an applicable Digital Twin
- Development of a SMART Component
- In-situ applicable
- Analysis, Condition Monitoring, Forecast
Status
- Project started
- Valve available
- Cooperation with Frauenhofer
Delivery
- End of project March 2022